LevelOne GTL-2881 - Figure 232: Configuring Static Bindings for Ipv6 Source Guard; Figure 233: Displaying Static Bindings for Ipv6 Source Guard

Chapter 12 | Security Measures
IPv6 Source Guard
– 367 –
◆ Type – Shows the entry type:
■
DHCP – Dynamic DHCPv6 binding, stateful address.
■
ND – Dynamic Neighbor Discovery binding, stateless address.
■
STA – Static IPv6 Source Guard binding.
Web Interface
To configure static bindings for IPv6 Source Guard:
1. Click Security, IPv6 Source Guard, Static Configuration.
2. Select Add from the Action list.
3. Enter the required bindings for each port.
4. Click Apply
Figure 232: Configuring Static Bindings for IPv6 Source Guard
To display static bindings for Iv6 Source Guard:
1. Click Security, IPv6 Source Guard, Static Configuration.
2. Select Show from the Action list.
Figure 233: Displaying Static Bindings for IPv6 Source Guard