Chapter 14
| Multicast Filtering
Multicast VLAN Registration for IPv6
– 591 –
◆
Count
– The number of multicast services currently being forwarded from the
MVR6 VLAN.
◆
Clear MVR6 Group
– Clears multicast group information dynamically learned
through MVR6. Statically configured multicast addresses are not cleared.
Web Interface
To display the interfaces assigned to the MVR6 receiver groups:
1.
Click Multicast, MVR6.
2.
Select Show Member from the Step list.
3.
Select an MVR6 domain.
Figure 391: Displaying MVR6 Receiver Groups
Displaying
MVR6 Statistics
Use the Multicast > MVR6 > Show Statistics pages to display MVR6 protocol-related
statistics for the specified interface.
Parameters
These parameters are displayed:
◆
Domain ID
– An independent multicast domain. (Range: 1-5)
◆
VLAN
– VLAN identifier. (Range: 1-4094)
◆
Port
– Port identifier. (Range: 1-28)
◆
Trunk
– Trunk identifier. (Range: 1-16)
Query Statistics
◆
Querier IPv6 Address
– The IP address of the querier on this interface.
◆
Querier Expire Time
– The time after which this querier is assumed to have
expired.
◆
General Query Received
– The number of general queries received on this
interface.
To Next Page
