Lexmark MB2236 - General Information; Printer Model Configurations; Supported Paper Sizes, Types, and Weights; Supported Paper Sizes

General information
Printer model configurations
The Lexmark
TM
MB2236adw MFP is a small, monochrome, network‑capable, multifunction laser printer.
Model Configurations Machine type/model
MB2236adw Network-ready monochrome laser printer with 2‑line
LCD display, wireless capability, analog fax, internal
duplex printing, and simplex scanning for small
workgroups
3400‑481
Supported paper sizes, types, and weights
Supported paper sizes
Notes:
• Paper less than 210 mm (8.3 in.) wide always prints at reduced speed.
• Use the manual feeder when printing on paper less than 105 mm (4.1 in.) wide.
• The minimum paper dimension supported for two‑sided printing is 210 x 279.4 mm (8.3 x 11 in.).
• The maximum paper length supported by the scanner glass is 297 mm (11.7 in.).
• For two-sided printing on letter‑, legal‑, or folio‑size paper, make sure that the paper size setting in the
duplex unit is set to Letter.
Paper size 250‑sheet tray Manual feeder Two‑sided
printing
Scanner glass Automatic
document
feeder
A4
210 x 297 mm
(8.27 x 11.7 in.)
A5 (short edge feed)
148 x 210 mm
(5.83 x 8.27 in.)
X
A5 (long edge feed)
210 x 148 mm
(8.27 x 5.83 in.)
X
A6
105 x 148 mm
(4.13 x 5.83 in.)
X
JIS B5
182 x 257 mm (7.17 x 10.1 in.)
X
* This paper source supports paper size only up to 216 x 297 mm (8.5 x 11.7 in.).
3400-48x
General information
19