Lexmark MB2236 - Front Removals; Control Panel Removal

9 Remove the fan, and then remove the gear.
Installation note: Before installing the gear, make sure that it is properly greased.
Front removals
Control panel removal
1 Remove the tray insert.
2 Remove the duplex unit.
3 Remove the rear door. See “Rear door removal” on page 243.
4 Remove the bottom rear door. See “Bottom rear door removal” on page 244.
5 Remove the left cover. See “Left cover removal” on page 227.
6 Remove the right cover. See “Right cover removal” on page 233.
3400-48x
Parts removal
238