Lexmark MB2236 - 200 Paper Jams

200 paper jams
200 paper jam messages
Error code Description Action
200.04 Paper fed from the manual feeder cleared the
sensor (input sensor S3) earlier than expected.
See
“Sensor (input sensor S3) service check” on
page 94.
200.05 Paper fed from the manual feeder never
cleared the sensor (input sensor S3).
200.06 Paper fed from the manual feeder was not
picked. Paper did not reach the sensor (input
sensor S3).
200.07 Paper reached the sensor (input sensor S3)
earlier than expected.
200.12 Paper fed from tray 1 arrived at the sensor
(input sensor S3) earlier than expected.
200.13 Paper fed from tray 1 was detected later than
expected or was never detected at the sensor
(input sensor S3).
200.14 Paper fed from tray 1 cleared the sensor (input
sensor S3) earlier than expected.
200.15 Paper fed from tray 1 never cleared the sensor
(input sensor S3).
200.91 Paper remains on the sensor (input sensor S3)
during the warm up sequence.
See
“Sensor (input sensor S3) static jam service
check” on page 91.
Sensor (input sensor S3) static jam service check
Action Yes No
Step 1
a Make sure that the tray insert is properly inserted.
b Make sure that the paper type and size settings match the
paper type and size set on the tray.
c Make sure that the duplex unit is properly inserted.
d Make sure that the paper size setting in the duplex unit matches
the printer setting.
e Make sure that the front and rear doors are fully closed.
f Make sure that the output bin is free from obstructions.
Does the problem remain?
Go to step 2. The problem is
solved.
3400-48x
Diagnostics and troubleshooting
91