Lexmark MB2236 - 202 Paper Jams

202 paper jams
202 paper jam messages
Error code Description Action
202.03 Paper fed from the manual feeder never
arrived at the sensor (fuser exit sensor S4).
See
“Sensor (fuser exit sensor S4) service check”
on page 97.
202.05 Paper fed from the manual feeder never
cleared the sensor (fuser exit sensor S4).
See
“Sensor (fuser exit sensor S4) never cleared
service check” on page 101.
202.13 Paper fed from tray 1 never arrived at the
sensor (fuser exit sensor S4).
See
“Sensor (fuser exit sensor S4) service check”
on page 97.
202.15 Paper fed from tray 1 never arrived at the
sensor (fuser exit sensor S4).
See
“Sensor (fuser exit sensor S4) never cleared
service check” on page 101.
202.91 Paper remains on the sensor (fuser exit sensor
S4) during the warm up sequence.
See
“Sensor (fuser exit sensor S4) static jam service
check” on page 105.
202.93 Paper never arrive at the sensor (fuser exit
sensor S4) which triggered a flush action.
See
“Sensor (fuser exit sensor S4) service check”
on page 97.
Sensor (fuser exit sensor S4) service check
Action Yes No
Step 1
a Make sure that the tray insert is properly inserted.
b Make sure that the paper type and size settings match the
paper type and size set on the tray.
c Make sure that the duplex unit is properly inserted.
d Make sure that the paper size setting in the duplex unit matches
the printer setting.
e Make sure that the front and rear doors are fully closed.
f Make sure that the output bin is free from obstructions.
Does the problem remain?
Go to step 2. The problem is
solved.
Step 2
a Remove the imaging unit and toner cartridge, and then make
sure that the paper path is free of jams and obstructions.
b Clear all rollers of dirt and contamination.
Does the problem remain?
Go to step 3. The problem is
solved.
Step 3
a Perform a POR.
b Enter the Diagnostics menu, and then navigate to:
Input tray quick print > Tray 1 > Single
Does the problem remain?
Go to step 4. The problem is
solved.
3400-48x
Diagnostics and troubleshooting
97