Registration adjust
This setting lets you adjust the skew, margins, or print a Quick test page.
1 Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Registration adjust
2 Select a setting to adjust.
Universal Override
This setting allows the user to feed custom media sizes to a Custom Media Tray.
1 Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > Universal Override
2 Select a setting to adjust.
HVPS adjust
This setting allows the HVPS calibration data to be recovered or entered for the specific HVPS installed. The
HVPS calibration data must come from the next level of support.
1 Enter the Diagnostics menu, and then navigate to:
Printer diagnostics & adjustments > HVPS adjust
2 Select a setting to adjust.
Scanner Diagnostics
Motor Tests
1 Enter the Diagnostics menu, and then navigate to:
Scanner Diagnostics > Motor Tests
2 Select a motor, and then press .
Notes:
• If the motor is activated, then it is properly working.
• Some motors require automatic deactivation in order to avoid secondary issues such as possible
damage and contamination.
• Some tests require a special action to activate a motor such as removing a major component.
• If the motor fails, the test failure may not indicate a failed motor. Further troubleshooting may be
required. Check the boards and cables for possible issues.
List of motor tests
Flatbed Scanner
ADF Transport
3400-48x
Service menus
195
To Next Page
Loading...
