Mark Log
This setting allows you to create a service, maintenance, or custom log entry. Each log entry is added in the
printer event log.
1 Enter the Diagnostics menu, and then navigate to:
Event Log > Mark Log
2 Select a log that you want to create, and then press .
Input tray quick print
This setting lets you print a single or continuous Quick test page in either duplex or simplex mode.
1 Enter the Diagnostics menu, and then select Input tray quick print.
2 Select where you want to print the pages from.
3 Select whether to print a single or continuous test page, and then press .
Output bin quick feed
This setting lets you feed a single or continuous page from the standard bin.
1 Enter the Diagnostics menu, and then navigate to:
Output bin quick feed > Standard bin
2 Select whether to print a single or continuous test page, and then press .
Printer Setup
Printed page count (mono)
This setting displays the amount of pages printed in mono.
1 Enter the Diagnostics menu, and then navigate to:
Printer Setup > Printed page count (mono)
2 View the printed page count for mono.
Permanent page count
This setting displays the total number of pages printed. After all the print tests are completed, this value resets
to zero.
1 Enter the Diagnostics menu, and then navigate to:
Printer Setup > Permanent page count
2 View the permanent page count.
3400-48x
Service menus
192
To Next Page
Loading...
