Lexmark MB2236 - Page 31

Action Yes No
Step 7
a Make sure that the toner cartridge is properly installed and free
of damage.
b Make sure that the smart chip contacts are free of corrosion
and contamination.
c Make sure that the developer roller surface is free of damage.
d Make sure that the toner HVPS contacts are free of corrosion
and contamination.
e Enter the Diagnostics menu, and then select Advanced Print
Quality Samples.
Does the problem remain?
Go to step 8. The problem is
solved.
Step 8
Replace the toner cartridge.
Does the problem remain?
Go to step 9. The problem is
solved.
Step 9
a Check the HVPS toner contact spring for proper installation and
damage.
b Check the toner smart chip contact for proper installation and
damage.
c Check the toner contact spring for corrosion and
contamination.
Are the HVPS toner contact spring and toner smart chip contact
properly installed and free of damage and contamination?
Go to step 11. Go to step 10.
Step 10
a Make sure that the HVPS toner contact spring is in proper
contact with the toner cartridge.
b Make sure that the HVPS toner contact spring is in proper
contact with the HVPS.
c Reseat the smart chip contact cable.
Does the problem remain?
Contact the next
level of support.
The problem is
solved.
Step 11
a Check the HVPS characterization.
b Reseat the HVPS cables.
c Check the HVPS cables for proper installation and damage.
d Check the HVPS spring contact for proper connection to the
board.
Is the HVPS properly installed and free of damage?
Contact the next
level of support.
Go to step 12.
3400-48x
Diagnostics and troubleshooting
31