Print Configuration Menu Instruction Sheet
This prints a page that contains:
1 Instructions on how to navigate through the Configuration menu settings.
2 The order of the Configuration menu settings, the LED pattern that represents each setting, the current value of
each setting, and the possible values of each setting.
Restore Base
Warning—Potential Damage: This operation cannot be undone.
This restores all non-critical base device NVRAM settings to their factory default settings.
Restore STD NET
Warning—Potential Damage: This operation cannot be undone.
This restores all network NVRAM settings. The printer immediately performs a POR and restores the appropriate settings
to their factory default values. This option is available only on models with an integrated network adapter.
Hex Trace
Hex Trace helps in isolating printing problems when unexpected characters print or characters are missing. This helps
determine if there is a problem with the language interpreter or the cable by providing information about what the
printer is receiving.
Available options:
• Off
• On
To enter Hex Trace mode, select On and then POR the printer.
To exit this mode, POR the printer.
Prt Quality Pgs
This prints a report that contains a limited set of the information that appears in the Diagnostics menu version of the
Print quality pages report.
A5 Loading
This determines the orientation used when printing on A5 paper.
Available options:
• Long Edge—The printer will print A5-size paper in the long-edge feed orientation from all trays.
• Short Edge—The printer will print A5-size paper in the short-edge feed orientation from all trays.
4514-220, -230
Service menus
120
To Next Page
Loading...
