1
5
6
2
3
4
Access area Description
1 Standard bin
2 Rear door
3 Standard 250‑sheet tray (Tray 1)
4 Optional 250‑ or 550‑sheet tray (Tray 2)
5 Multipurpose feeder door
6 Front door
Notes:
• When Jam Assist is set to On, the printer automatically flushes blank pages or pages with partial prints to the
standard bin after a jammed page has been cleared. Check your printed output stack for discarded pages.
• When Jam Recovery is set to On or Auto, the printer reprints jammed pages. However, the Auto setting does not
guarantee that the page will print.
200 paper jams
200 paper jam messages
Error code Description Action
200.01 Input sensor covered during warm-up sequence. Go to “Sensor (input) static jam service check” on
page 63.
200.02 Input sensor covered too quickly. Go to “Sensor (input) early/late arriving service
check” on page 64.
200.03 Media did not reach input sensor from MPF.
200.05 Input sensor covered too long.
200.07 Input sensor failed to become uncovered from sheet
ahead.
200.08 Page arrive at input senor at unexpected time.
4514-220, -230
Diagnostic information
59
To Next Page
Loading...
