Lexmark MS310 Series - Laser Scanning Unit (LSU) Removal

5 Remove the two screws (A) in front.
A
6 Remove the two screws (B) at the rear.
B
7 Lift the top cover to remove.
Laser scanning unit (LSU) removal
1 Remove the right cover. See “Right cover removal” on page 160.
2 Remove the left cover. See “Left cover removal” on page 144.
3 Remove the rear door and cover. See “Rear door and cover removal” on page 206.
4 Remove the top cover. See “Top cover removal” on page 211.
5 Remove the cooling fan. See “Cooling fan removal” on page 161.
6 Disconnect the cable (A) from the LSU.
4514-220, -230
Repair information
212