Imaging unit very low [84.xy]
You may need to replace the imaging unit very soon. If necessary, press on the printer control panel to continue
printing.
Non-Lexmark imaging unit, see User’s Guide [33.xy]
The printer has detected a non‑Lexmark supply or part installed in the printer. Your Lexmark printer is designed to
function best with genuine Lexmark supplies and parts. Use of third-party supplies or parts may affect the performance,
reliability, or life of the printer and its imaging components.
Warning—Potential Damage: Use of third-party supplies or parts can affect warranty coverage. Damage caused by
the use of third-party supplies or parts is not covered by the warranty.
All life indicators are designed to function with Lexmark supplies and parts, and may deliver unpredictable results if
third-party supplies or parts are used. Imaging component usage beyond the intended life may damage your Lexmark
printer or associated components.
To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your printer,
press
and simultaneously for at least four seconds to clear the light sequence.
Replace imaging unit, 0 estimated pages remain [84.xy]
Replace the imaging unit. For more information, see the instruction sheet that came with the supply.
Reinstall missing or unresponsive imaging unit [31.xy]
Try one or more of the following:
• Remove the imaging unit, and then reinstall it.
• Remove the imaging unit, and then install a new one. For more information, see the instruction sheet that came
with the supply.
Replace unsupported imaging unit [32.xy]
Remove the imaging unit, and then install a supported one. For more information, see the instruction sheet that came
with the supply.
Paper loading messages
Change media
Try one or more of the following:
• Load the tray or feeder with the correct size and type of paper, and then press on the printer control panel to
continue printing.
• Make sure the correct paper size and type are specified in the Paper menu:
– If the printer is on a network, then access the Embedded Web Server.
1 Open a Web browser, and then type the printer IP address in the address field.
4514-220, -230
Diagnostic information
44
To Next Page
Loading...
