Repair information 4-11
7100-XXX
9. Remove the screw (B) which secures the top cover to the MFP frame.
10. Remove the upper left rear cover. See “Upper left rear cover removal” on page 4-17.
11. Remove the screw (C) which secures the top cover to the MFP frame.
12. Release the tabs on the front of the top cover assembly.
13. Lift the top cover assembly and remove.
Note: If you are replacing the top cover assembly, remove the scanner arms. They will be used on the new
top cover. See “Scanner arm removal” on page 4-52.
B
C
To Next Page
Loading...
