Repair information 4-55
7100-XXX
9. With a flat-blade screwdriver, press against the tab on the ADF unit retainer.
10.Lift the ADF unit up and away from the flatbed unit.
Note: Remove the ADF paper tray from the old ADF unit. It will be used on the new ADF unit.
ADF mechanism cover removal
1. Open the ADF top cover, and remove the ADF separator roll and ADF separator pad.
2. Open the flatbed cover.
3. Remove the screw (A) which secures the ADF front cover to the flatbed cover.
Note: When replacing this screw, do not overtighten it.
To Next Page
Loading...
