4-10 Service Manual
7100-XXX
Cover removals
Top cover assembly removal
1. Remove the scanner assembly. See “Flatbed assembly removal” on page 4-49.
2. Remove the upper right rear cover. See “Upper right rear cover removal” on page 4-17.
3. Remove the cleaning roller cover. See “Cleaning roller cover removal” on page 4-4.
4. Remove the photodeveloper cartridge. See “Photodeveloper cartridge removal” on page 4-8.
5. Open the OPC cover.
6. Remove the two screws (A) from the top cover assembly.
7. Open the rear cover.
8. Remove the upper right rear cover. See “Upper right rear cover removal” on page 4-17.
A
To Next Page
Loading...
