2-50 Service Manual
7100-XXX
insufficient fusing service check
Printed image is partially missing.
Problem area Action
1 Fuser tension release lever Fuser tension release lever is open. Check fuser, and remove
shipping pieces if still installed. Close release lever.
2 Driver media settings Driver media setting is wrong. Ensure proper media setting is
selected for specific media in use.
3 Non-recommended paper Non recommended paper is being used. Replace paper with
recommended paper.
4 Fuser Replace failed fuser. See “Fuser assembly removal” on
page 4-6.
Note: The fuser is a customer order supply.
To Next Page
Loading...
