5-2 Service Manual
7100-XXX
Part name Description
Paper stopper Stopper for exited papers.
Top cover assembly Upper enclosure and also the paper exit tray.
Rear cover assembly Printer rear enclosure that opens allowing clearing of internal paper
jams or maintenance work.
Release lever (rear cover assembly) Releases rear cover assembly.
Release lever (top cover assembly) Releases the opening portion of the top cover assembly. Opening the
top cover assembly allows access to the photodeveloper unit.
Right cover Covers the right side of the printer where the motors and drives are
located.
Front cover Printer front enclosure that opens allowing toner cartridge or waste
toner bottle replacement.
Paper tray Standard paper tray that holds printer paper.
Left front cover Covers the left side of the printer over the MFP engine card.
Left rear cover Covers the left side of the printer over the RIP card.
Power switch Turns the printer on and off.
Upper left cover Covers the fuser fan.
USB connection Connects the MFP to the host by USB.
Network connection Connects the printer to an 10/100/1000 base T network.
AC input inlet Connects the power cord that supplies AC power to the printer.
To Next Page
Loading...
