General information 1-9
7100-XXX
Media sizes
Output capacity by media and source
Media sizes Dimensions Input Output
Universal 250-sheet tray
1
Standard setting
Universal 250 sheet tray
Set to legal
Optional 530-sheet tray
2
Standard 250-sheet bin
mm in
A4 210 x 297 8.27 x 11.7 X X X X
A5 148 x 210 5.83 x 8.27 X X
JIS B5
3
182 x 257 7.17 x 10.1 X X X
Letter 216 x 279.4 8.5 x 11 X X X X
Legal 216 x 356 8.5 x 14 X X
Executive 184.2 x 266.7 7.25 x 10.5 X X X X
Folio 216 x 330 8.5 x 13 X X
Statement 139.7 x 215.9 5.5 x 8.5 X X
Universal
1
XX X
Standard 250–sheet letter tray 104.8 x 210 to 215.9 x
297
4.125 x 8.27 to 8.5 x
11.7
Optional 250–sheet legal tray 104.8 x 210 to 215.9 x
355.6
4.125 x 8.27 to 8.5 x 14
Envelope sizes Dimensions Dimensions
9 Envelope
2
98.4 x 225.4 3.875 x 8.9 X X X
COM 10 Envelope 104.8 x 241.3 4.12 x 9.5 X X X
DL Envelope 110 x 220 4.33 x 8.66 X X X
C5 Envelope
2
162 x 229 6.38 x 9.01 X X X
B5 Envelope
2
176 x 250 6.93 x 9.84 X X X
1
Select Universal when using a non-standard size sheet of print material. The MFP formats the page for the maximum size 8.5 X 14
in(215.9 X 355.6 mm). Set the actual size from your software application.
2
Supported through the driver.
3
B5 may be supported in optional tray 1, but size sensing must be turned off.
Source Media Capacity Orientation
Standard output bin (top)¹ Supports all sizes listed in the “Media
sizes” table
250 sheets (20 lb paper)
50 Transparencies
Collated
Facedown
To Next Page
Loading...
