5-28 Service Manual
4025-XXX
BD9 Tray 2 Feeder↔I/O PWB
BD9 Tray 2 Feeder↔I/O PWB
The following table shows the signal names for this BD:
Signal Name Description
SNR#NOP2 Signal from the Tray 2 No Paper Sensor. 5V=Not actuated. 0V=Actuated
SNR#LVL2 Signal from the Tray 2 Level Sensor. 5V=Not actuated. 0V=Actuated
SNR#SIZE2 Analog signal from the Tray 2 Size Sensor. 0VDC ~ 5VDC
SNR#TAROL2 Signal from the Take Away Sensor 2. 5V=Not actuated. 0V=Actuated
1TM#INTLK Signal from the Tray 2 Interlock Switch. 5V=Actuated. 0V=Not actuated
CL#FEED2 Switches Tray 2 Feed Clutch. 24V=Off. 0V=On
MOT#LIFT2 Switches Tray 2 Lift Motor. 24V=Off. 0V=On
To Next Page
Loading...
