4. Operating AC Smart
Installation/Owner's Manual
4-91
5. Check whether the name of the applicable auto power operation group has bee changed from
'Group', and click on the [Save] button to save the current setting. When the 'Information' screen to
check the saving process is displayed, click on the [Yes] button.
6. Saving process is completed. When the saving process is completed, the [Save] button is
deactivated and then reactivated when information is changed. Click on the [Close] button to return
to the prior screen.
After clicking on [Save] button, when the 'Information'
screen is displayed, click on [Yes] button
Click on [Close] button to
return to prior screen
To Next Page