4. Operating AC Smart
Installation/Owner's Manual
4-107
2. It automatically searches and registers the indoor unit and ventilator connected to AC Smart.
Registered units will be added to the below table.
3. Save the searched unit. When you click on the [OK] button, an ‘Information’ screen to check
whether to apply the current setting will be displayed. Click on [Yes] to save the setting and it will
return to the prior screen.
Registered unit is
displayed
To apply to system, click
on [OK] button, when
'Information' screen is
displayed, click on [Yes]
button and click on [Yes]
button
To Next Page