4. Operating AC Smart
AC Smart
4-108
4. Lastly, you must register the unit setting that has been temporarily saved to the system. When you
click on the [Save] button, an ‘Information’ screen to check whether to apply the current setting will
be displayed. Click on the [Yes] button.
5. The setting to now will be applied to the system and you will see a message saying that you have
completed saving the setting on the screen. Click on the [OK] button to complete the registration.
To apply to system, click on [Save]
button and click on [Yes] button
When it is saved, click on
[OK] button
To Next Page