Lighthouse SOLAIR 3350 - Page 178

Lighthouse SOLAIR 3350, 5350 Gen E Operating Manual
I-2 248083387-1 Rev 10
Clock 6-30
CMD 4-19
COMM Address 6-37
Command Console 4-19
Command Register B-6
Communicating with the Instrument 5-1
Communication Modes 2-2, 2-4, 5-1
Communications 5-1
Communications Settings B-1
CONC 6-24
Concentration Mode 6-6, 6-24
Configuration 6-14
Alarm Setup 6-27
Alarm Threshold 6-27
Align Touch Screen 6-32
Audible Beep Adjust 6-32
Beep Mode 6-25
Clock Setup 6-30
COMM Address 6-37
Contrast Adjust 6-32
Cycles 6-22
Delay 6-22
Device Setup 6-29
Hold Time 6-22
Location 6-44
Location Setup 6-44
Options 6-32
Particle Channels 6-15
Particle Display 6-26
Passwords 6-44
Sample Setting 6-24
Sample Time 6-22
Sample Timing 6-21
Sample Volume 6-23
Security 6-44
Service Screen 6-46
Configuration Password 6-46
Configuration Screen 6-14
Data Setup 6-14
Device Setup 6-14
Configuring with the MODBUS Protocol 7-4
Connecting Isokinetic Probe 3-9
Connecting Power 3-7
Connecting to External Computer 3-12
Connection to host lost 4-23
Contrast Adjust 6-32
Count Mode 6-24
Auto 6-24
Concentration 6-24
Manual 6-24
Count Modes 2-2, 2-4
Counting Efficiency 2-2, 2-3
Crossover Cable 5-2
Cross-over Cat5 4-17
Cross-over Cat5 Setup 4-19
Cumulative 6-26
Cycles 6-6, 6-22
D
Data Display 6-6
Data Registers B-8
Device Status Word B-9
Data Setup 6-14
Data Storage 2-2, 2-4
Data Type Registers B-11
Data Units Registers B-12
Date/Time Display 6-5
Date/Time Setup 6-30
Default Instrument Parameters
Changing 7-5
Definitions 4-16
Delay 6-22
Device Setup 6-14, 6-29
Device Status B-6
Device Status Word B-9
DHCP 4-16
DiffCuml on Zoom 6-35
Differential 6-26
Differential Pressure Sensor
Accessories 3-3
Dimensions 2-3, 2-4
E
Enable Alarming B-16
Environmental Sensors 4-1
Ethernet Configuration 4-9, 4-18
Ethernet Port 5-2
EU GMP 4-9, 6-73
External Start Counter 7-7