LIGHTMED TruScan Pro – Operator’s Manual Rev. No. 01 Page 76 of 109
prevent system damage during the transport. Check the laser after transport for full
functionality and alignment accuracy.
5.2 Unpacking and Receiving Inspection
The laser system is usually packed in two separated cardboard boxes as well as a portable
carrying case, as shown in Figure 15 and 16 below:
Figure 15: Packing carton for the table assembly.
Figure 16: Portable carrying case for TruScan console.
Upon receiving the system, please inspect the packing carton for signs of mishandling, which
must be reported to the freight handler before the instrument is unpacked. If the damage that
occurred during transport is not reported, the Manufacturer reserves the right to decline any
warranty claims. The freight company shall take full responsibility for any damage occurred during
transport.
If the external cardboard packaging looks acceptable, proceed to check the internal packaging,
as described in Section 5.4 Installation Process.
The packing list is used to verify the items delivered. Please notify the Manufacturer if any
discrepancy is found.
To Next Page
Loading...