Lightware HDMI20-OPTC series - Front View; Product Overview


3. Product Overview HDMI20-OPTC series – User's Manual 13
3
Product Overview
The following sections are about the physical structure of the device, input/
output ports, and connectors:
Front View
INFO: All models have the same look and controls on the front panel.
HDMI20-OPTC-TX220 series
HDMI20-OPTC-RX220 series
INFO: All models have the same look and controls on the front panel.
1
Status LEDs The LEDs give feedback about the state, connections and certain settings of the
unit. For details, see Status LEDs - Transmitter and Status LEDs - Receiver section.
2
Select button Transmitter: Select button toggles between the Input 1 and Input 2.
6
Function button Receiver: Function button sets the output conversion mode. See the details in
Output Conversion Modes section.
3
USB Port USB mini-B port for local controlling the unit by Lightware Device Controller
software.
4
LCD display Transmitter: Display of the front panel menu.
5
Jog dial knob Transmitter: Browse the menu by turning the knob, click on the desired item to
check or change it.
MAIN MENU
> System Settings
Ports
EDID
Health
Remote
POWER / LIVE
FIBER LINK
HDCP
INPUT 1 INPUT 2
CONTROL
SELECT
USB
HDMI20
OPTC
220
HDMI20-OPTC-TX220
HDMI 2.0 Multimode Fiber Transmitter
1
3 4
5
2
HDMI20-OPTC-RX220
HDMI 2.0 Multimode Fiber Receiver
POWER / LIVE
FIBER LINK
HDCP SIGNAL PRESENT OUTPUT CONVERSION
CONTROL
FUNCTION
USB
HDMI20
OPTC
220
3
6
1
Î 
Î 
Î 
Î 
Î 
Î 
Î 
Î 



