Lightware HDMI20-OPTC series - Unmuting Input Port; HDCP Setting; Unlocking Input Port; Muting Input Port


 HDMI20-OPTC series – User's Manual 47
Video Port and Crosspoint Settings
Querying the Crosspoint Setting
Command and Response
Ý 
Ü ;
Example
Ý 
Ü 
I1 input port is connected to all output ports.
Switching Video Input
Command and Response
Ý :)
Ü 
Example
Ý 
Ü 
Muting Input Port
Command and Response
Ý )
Ü 
Example
Ý 
Ü 
Unmuting Input Port
Command and Response
Ý )
Ü 
Example
Ý 
Ü 
Locking Input Port
Command and Response
Ý )
Ü 
Example
Ý 
Ü 
Unlocking Input Port
Command and Response
Ý )
Ü 
Example
Ý 
Ü 
HDCP Setting
This setting allows to send non-encrypted content to a non-HDCP compliant display. See more information
in HDCP Management section.
Command and Response
Ý 
Ü 
Parameters
0: Disable HDCP on input
1: Allow HDCP 1.4 only
2: Allow HDCP 2.2 and HDCP 1.4
Example
Ý 
Ü 



