Lightware HDMI20-OPTC series - EDID Management; Querying the Emulated Edids; Querying the Validity of a Dynamic EDID; Querying the Preferred Resolution of an User EDID


 HDMI20-OPTC series – User's Manual 55
EDID Management
Querying the Emulated EDIDs
Command and Response
Ý 
Ü :E1;:E2
Parameters
 Parameter description Parameter values
 Source EDID memory place F#: Factory (F1-148)
U#: User (U1- U14)
D#: Dynamic (D1-D2)
Example
Ý 
Ü 
Dynamic EDID was emulated for both input port.
Querying the Validity of a Dynamic EDID
Command and Response
Ý .Validity
Ü 
Parameters
 Dynamic EDID memory place(D1 or D2)
  true or false
Example
Ý 
Ü 
The ‘Validity’ property is true, valid EDID is stored in D1 memory place.
Querying the Preferred Resolution of an User EDID
Command and Response
Ý .PreferredResolution
Ü 
Parameters
 User EDID memory slot (U1-14)
 [x]x[y][i\|p][f]
Example
Ý 
Ü 
         
query the name of the monitor.
Emulating an EDID to an Input Port
Command and Response
Ý :)
Ü 
Parameters
: 
: The emulated EDID memory of the desired input port.
Example
Ý 
Ü 



