Lightware HDMI20-OPTC series - Enabling Command Injection Mode; Setting the Databit; Setting the Parity; Setting the Stopbits


 HDMI20-OPTC series – User's Manual 52
Setting the Databit
Command and Response
Ý 
Ü 
Parameters
 8 or 9
Example
Ý 
Ü 
Setting the Stopbits
Command and Response
Ý 
Ü 
Parameters
 0: 1
1: 1,5
2: 2
Example
Ý 
Ü 
Setting the Parity
Command and Response
Ý 
Ü 
Parameters
 0: no parity 1
1: odd
2: even
Example
Ý 
Ü 
 Enabling Command Injection Mode
Command and Response
Ý 
Ü 
Parameters
 true: enabled
false: disabled
Example
Ý 
Ü 
ATTENTION! The Command injection status is stored in another read-only property:

1




