Lightware HDMI20-OPTC series - System Commands; Querying the Product Name; Setting the Device Label; Querying the Serial Number


 HDMI20-OPTC series – User's Manual 45
System Commands
Querying the Product Name

Command and Response
Ý 
Ü 
Example
Ý 
Ü 
Setting the Device Label
ATTENTION! The device label can be changed to a custom text which is displayed in many windows of
the LDC. This writable parameter is not the same as the ProductName parameter.
Command and Response
Ý 
Ü 
The Device Label can be 39 character length and ASCII characters are allowed. Longer names are truncated.
Example
Ý 
Ü 
Querying the Serial Number
Command and Response
Ý 
Ü 
Example
Ý 
Ü 
Querying the Firmware Version
Command and Response
Ý 
Ü 
Example
Ý 
Ü 
Resetting the Extender
The extender can be restarted – the current connections (LAN, RS-232) will be terminated.
Command and Response
Ý 
Ü 
Example
Ý 
Ü 
Restoring the Factory Default Settings
Command and Response
Ý 
Ü 
Example
Ý 
Ü 



