HDMI20-OPTC series – User's Manual 58
Ý
Changing the IP Address (Static)
Ý
Ý
Changing the Subnet Mask (Static)
Ý
Ý
Changing the Gateway Address (Static)
Ý
Ý
Changing the DHCP State
Ý
Enabling Ethernet Port
Ý
Ý P1.Rs232Mode
Setting the RS-232 Operation Mode
Ý
Setting the BAUD Rate
Ý
Setting the Databit
Ý
Setting the Stopbits
Ý
Setting the Parity
Ý
Enabling Command Injection Mode
Ý
Sending Message via the Communication Ports
Sending Message via an RS-232 Port
Ý )
Ý )
Ý )
Sending Message via TCP Port
Ý :)
Ý :)
Ý :)
Sending Message via UDP Port
Ý :)
Ý :)
Ý :)
EDID Management
Ý
Ý .Validity
Ý .PreferredResolution
Emulating an EDID to an Input Port
Ý :)
Copying an EDID to User Memory
Ý :)
Deleting an EDID from User Memory
Ý )
Resetting the Emulated EDIDs
Ý