Page 108 / 119 Section 9. Firmware upgrade
Step 4. Finish.
If the upgrade of a device is finished, the log can be opened by the View button on the right.
When all the tasks are finished, a window appears. Click OK to close and Next to display
the summary page.
Repeat button starts the process again with the selected device(s).
Open logs button opens the temporary folder where the logs can be found.
Export logs by saving the files as a zipped file.
Press Exit to close the program.
If the upgrade failed, the progress bar of the device is changed to red; restart the device(s)
and repeat the process.
ATTENTION!
However the device is rebooted after the firmware upgrade, switching it off and on again is
recommended.
To Next Page
Loading...
