Maintenance 5
Inspection and maintenance overview
9000 h Service plan
At operating hours
Carried
out
9000 18000
9
8
Information on service plan
Dependent on the consumables used, the driving style and the operating conditions,
but at least every four years. Refer also to the recommendation for consumables.
Preparations
Clean the truck (if necessary)
Read out error memory and delete
Calibrate the drive potentiometer and joysticks
Enter the next maintenance interval
Engine
Renew the engine oil
Change the engine oil filters
Change the fuel filter
Check condition and secure positioning of engine support and engine mount
Change V-ribbed belt
Change toothed belt and tensioning pulley (at latest after 5 years)
Change the water pump
Clean the water cooler and hydraulic oil cooler
Change the coolant
Check coo
lant concentration
Change air filter cartridge, check vacuum-operated switch
Change the safety cartridge in the air filter
Change the breather filter for charge air regulation
Clean
theoilbathairfilter
Check
intake and exhaust pipes for leaks
Check the particle filter system
Clean the pressure control device at the changing particle filter
Clean the water trap at the changing particle filter
Gea
rbox
Axle clamps and wheel motors: check the mountings
Operating Instructions – 394 807 10 01 EN – 07/2011 117
To Next Page
Loading...
