Linde H40D - Checking the condition and secure positioning of the engine support and engine mounting

Maintenance 5
Engine
¾ Close the bonnet.
Cleaning the water cooler and
hydraulic oil cooler, and checking
them for leaks
NOTE
Only clean the water cooler and hydraulic oil
cooler when the engine is switched off and has
cooled down.
¾ Open the bonnet.
d3941375
2
2
1
¾ Releasethe5screws(2
).
¾ Remove the cover sheet (1) from the rear.
Operating Instructions – 394 807 10 01 EN – 07/2011 133