4 Operation
Standard equipment
Adjusting the lumbar support (only with a
comfort driver’s seat)
NOTE
The lumbar support enables optimum configu-
ration of the seat back contour to the driver’s
body.
¾ Turn knob (5) to the left or right.
The extent to which the lower and upper
areas of the backrest are curved is adjusted
individually.
Adjusting the height-adjustable
comfort driver’s seat
WARNING
If the seat is not adjusted correctly, this may cause
injury to the driver’s back. The adjustment controls
for the driver’s seat should not be used during
operation.
Before starting the truck and whenever changing
drivers, adjust the seat to correspond to the driver’s
weight and make sure that the settings have all
engaged properly. Do not place any objects in the
driver’s rotation range.
NOTE
Sitting for long periods of time puts a lot of
pressure on the spine. Try to compensate for
this by performing regular simple gymnastic
movements.
34 Operating Instructions – 394 807 10 01 EN – 07/2011
To Next Page
Loading...
