4 Operation
Standard equipment
Standard equipment
Entering and exiting the truck
WARNING
Entering and exiting the truck can result in injuries
to the feet or back.
Always face the truck when you enter or exit the
truck.
NOTE
Do not use the steering wheel or the actuating
levers as an aid to get in or out.
¾ Use handle (1) (special equipment) or
longitudinal member (2) and step (3).
Adjusting the standard driver’s seat
and comfort driver’s seat
WARNING
If the seat is not adjusted correctly, this may cause
injury to the driver’s back. The adjustment controls
for the driver’s seat should not be used during
operation.
Before starting the truck and whenever changing
drivers, adjust the seat to correspond to the driver’s
weight and make sure that the settings have all
engaged properly. Do not place any objects in the
driver’s rotation range.
32 Operating Instructions – 394 807 10 01 EN – 07/2011
To Next Page
Loading...
