Linde H40D - Adjusting the luxury driver’s seat

Operation 4
Standard equipment
NOTE
Sitting for long periods of tim
e puts a lot of
pressure on the spine. Try to co
mpensate for
this by performing regular sim
ple gymnastic
movements.
Longitudinal adjustment
¾ Pull lever (1) upwards.
¾ Move the driver’s seat backwards or for-
wards on the runners to find the most com-
fortable position for the driver in relation to
the steering wheel and the accelerator ped-
als.
¾ Allow lever (1) to snap in
to place.
Adjusting the seat back
rest
¾ Push lever (2) upwards and hold in place.
¾ Move the seat backrest forwards or back-
wards until a comfortable seating position
for the driver is found.
¾ Release lever (2).
Setting the driver’s
weight
The correct driver’s weight will be set auto-
matically if the ignition is switched on and the
driver’s seat is occupied.
Operating Instructions – 394 807 10 01 EN – 07/2011 37