LineEye LE Series User Manual

-15-
■
To insert the batteries
1) Pull up the battery cover.
2) Insert two batteries. Positive pole of battery has to be inserted to the
side where it is labeled.
3) Put back the battery cover.

Charge Ni-MH Batteries
As a factory setting, LE-110SA/120SA cannot charge Ni-MH batteries
to prevent charging Alkali batteries by mistake. You can charge them
using the Ni-MH battery charger for AA-size.
LINEEYE conrms the performance of Ni-MH battery chargers: “BQ-
CC23” and “BQCC55” of Panasonic. “TNHC-34SMC” and “TNHC-
34HBC” of Toshiba.
■
Charge Ni-MH batteries by LE-110SA/120SA
To charge Ni-MH batteries by LE-110SA/120SA, you need to change the
settings of line monitor.
→ 2.6 Settings for Charging Batteries

There is a natural discharge on the batteries. If you do not use the line monitor
for a while, remove the batteries from the line monitor. We recommend
charging the batteries one in a year.

LINEEYE and our distributors are able to supply spare batteries.

We do not warrant the batteries.
+
+

LineEye LE Series Specifications

General

Brand	LineEye
Model	LE Series
Category	Measuring Instruments
Language	English