LineEye LE Series User Manual

■
Input by HEX
To enter the data to be sent, touch
[0] to [9] and [A] to [F] and input
it in hexadecimal. The entered
data is displayed by the character
code set in the data code of the
conguration.
You can switch to hexadecimal display by touching [HEX display].
■
Input by text
Touch “Text input” at the bottom of the transmission data registration screen
to open the input window.
In the input window, with the on-
screen keyboard, you can enter
ASCII characters excepting
control codes. You can enter up
to 256 characters in the input
window.
After entering it, touch the [OK] button to insert the entered text at the cursor
position in the transmission data table. The character code is converted at the
time of insertion according to the conguration settings.

Characters which cannot be converted are ignored or replaced with other
characters.

The character string entered in the input window is memorized until the power
is turned o. If you do not need it, touch [Clear]. All of them will be erased.
Touch [ = ] at the bottom of the
display screen to display the
edit menu which assists you in
entering data at the transmission
data table being edited.
-44-

LineEye LE Series Specifications

General

Brand	LineEye
Model	LE Series
Category	Measuring Instruments
Language	English