Touch “First data” to move the cursor to the rst data in the transmission data
table. Touch “Last data” to move the cursor to the nal data. Touch “Clear
table” to delete all the data in the transmission data table being edited.
■
Data ll
Inserts the specified amount of
data from “Begin data” to “End
data” for the size set at “Fill size”.
(Example) When executed with
begin data [30], End data [39], and
Fill size [256], data from 30h to
39h is repeatedly set in the table
for 256 bytes.
■
Table copy
Copies the contents of the selected
table.
■
Buer copy
Copy the measurement data
in the capture memory. The
data specified in “Copy size” is
copied from the first data on the
data display screen. Select the
communication line to be copied
from “TXD data” or “RXD data”.
-45-