D9U001GKB-0101 149/150
9 Enviroment protection
The company L I N E T spol. s r.o., is aware of the importance of environmental
protection for future generations. Within this company the environmental
management system is applied in accordance with the internationally agreed
standard ISO 14001.
The compliance with this standard is annually tested by the external audit
executed by an authorised company.
Materials used in this product are not environmentally hazardous. L I N E T
spol. s r.o., products meet valid requirements of national and European
legislation in the areas of
RoHS
and
REACH
, so they do not contain any
prohibited substances in excess quantities.
None of the wooden parts is made of tropical wood (such as mahogany,
rosewood, ebony, teak etc.) or made of timber from the Amazon region or from
similar rainforests. Product noise (sound pressure level) meets requirements of
the regulations for the protection of public health against undesirable effects of
noise and vibration in protected interior spaces of buildings (according to
standard IEC 60601-2-52). Used packaging materials are in accordance with
requirements of the Packaging Act.
For disposal of packaging materials after installation of products contact your
sales representative or manufacturer´s customer service about the possibility of
a free take-back of packaging through an authorized company (more details on
www.linet.cz).
9.1 Disposal
9.1.1 Within Europe
To dispose of the equipment:
• The equipment must not be disposed of as household waste.
• Dispose of this equipment at designated collection points or take-back
points.
L I N E T spol. s r.o., participates in a collective system with take-back company
REMA System
(see www.remasystem.cz/sberna-mista/).
By bringing electric and electronic equipment to a take-back point, you
participate in recycling and you save primary raw material resources while
protecting your environment from effects of unprofessional disposal.
To Next Page
Loading...