40/150 D9U001GKB-0101
4.4 Memory Functions
Mobile foot control and part of the hand control are equipped with buttons
(so called memory functions) to set up the positions for getting on,
examination and ultrasound. After pushing on the button the chair
automatically goes to the selected position set in advance. In case of
using the memory function, please, pay enhanced attention when the
chair is setting up itself for certain time – prevent collision with
surrounding objects or persons.
• Movements of impulse function can be stopped at any time using either the
stop button located on the manual controller or any button on the manual or
the foot controller.
• The chair is equipped with a tilting control sensor preventing it from
overtilting. If a dangerous tilt of the chair occurs, all chair movements are
automatically halted.
How to save positions on chair
To do this, use the "STORE" button (highlighted in red in the picture), which you
keep, and simultaneously push on one of the buttons for memory functions
(highlighted in blue in the picture). Saving the position is confirmed by a sound
signal (beep). Memory functions can be set up for up to three physicians.
To Next Page
Loading...