32/150 D9U001GKB-0101
4 Chair Operator
The chair can be operated only by trained personnel. Training is
conducted by the manufacturer’s expert representatives.
4.1 Motorized Adjustments (foot controller)
Relevance of the foot control buttons is evident in the picture. For motor set up
the requested function button needs to be pushed down and held. After pushing
requested button, the light coloured parts move.
The fixed foot control is used to adjust setting of the position of examination. It
is placed in the chair base and it has the following elements:
1. Setting up the chair height (the first two buttons from the left – up/down)
2. Setting up the back part joined with footrest (the third and fourth buttons
from the left – back part down and footrest up / back part up and footrest
down)
• When handling a chair without a patient, especially a chair is set in a higher
position, we do not recommend excessively loading or leaning on parts of it.
There could be a loss of stability and damage to the chair.
To Next Page
Loading...