92/150 D9U001GKB-0101
5.6 Connecting a network folder, placing a folder on the
desktop, saving images into a shared network folder
1) After successful pairing of the GRACIE chair with your PC/MAC, you need to
connect the folder where photos and videos taken from the video
colposcope of the GRACIE chair are stored.
2) Click on the folder
3) Type \\c-XXXXXXXXXXX\data in the address bar, where XXXXXXXXXXX is
the serial number on the nameplate of the Gracie chair.
or type //c-XXXXXXXXXXX.local in the address bar, where
XXXXXXXXXXX is the serial number on the nameplate of the Gracie chair
When typing the path into the address bar, make sure to use correct
slashes!
To Next Page
Loading...