34
11.2.1 Mains power LED
disconnected from the mains
11.3 Handset
A handset is included with the bed as an optional feature. The position of the handset depends on the patient’s
condition. The handset is available with and without button illumination. The button illumination of the illuminated
handset is active when the bed is connected to the mains. The functions of both handsets are identical. The
illumination is activated for 7s if any button was pressed and the illumination is activated for 3 minutes if GO
Button was pressed.
Fig. 14 Handset
1. Buttons Thigh Rest Position
2. LED Thigh Rest/Backrest Lock
3. Button Backrest Position
4. GO Button
5. Button Autocontour
6. Button Flashlight
7. LED Height Lock
8. Buttons Height Adjustment
To switch on the flashlight:
Press flashlight button 6.
Set the position as follows:
Activate the keypad by pressing the GO button.
Press and hold function button until desired position is reached.
NOTE The nursing staff must decide whether the patient can adjust the bed.
If the patient’s condition requires it, preventing the patient from adjusting the bed is possible by:
Disabling functions.
NOTE An adapter for the handset is available. The adapter enables quick mounting and dismounting (e.g.
replacing a defective handset, using the handset for another bed).
To Next Page
Loading...
Need help?
General
