LINET Multicare LE User Manual

26
9.1.1 Safety Strap
The sides of the foam base fit the sides of the Multicare mattress platform to prevent the mattress from shifting
when the patient is getting into or out of bed.
Furthermore, the mattress is equipped with an additional quick-release strap to prevent the mattress from shifting
if the head or foot board is removed. This strap is located next to the air pipe outlet on the mattress cover base.
To fix the strap:
 Loop black strap around metal bed frame and feed it back through the plastic clip.
To release the strap:
 Pull loose end of strap upward to release clip.
Fig. 11 Safety Strap
9.2 Installation of SCU (System Control Unit)
Material damage due to incorrect installation of SCU!
 If the SCU does not come factory-fitted, have it installed by a service
engineer authorised by Linet
®
.
Caution

LINET Multicare LE Specifications

General

Brand	LINET
Model	Multicare LE
Category	Medical Equipment
Language	English