LINET Multicare LE User Manual

69
Cleaning the mattress cover:
 Remove cover (see Removing the Mattress Cover).
 If machine washing mattress top/base covers, the temperature should be raised during the wash cycle, to
65°C/149°F, for 10 -15 minutes, or 71°C/160° F, for 3 - 10 minutes, using hospital approved detergents
and rinsing agents. (Note: maximum wash temperature 75°C/167°F).
 Dry cover in tumble dryer at low temperature.
Cleaning the SCU:
 Remove filter.
 Wipe SCU and filter with disinfectant.
 Let SCU and filter dry.
 Reinsert filter.
22.4 Removing the Mattress Cover
 Carefully open zipper under side skirt of mattress cover on foot end of mattress.
 Remove top part of mattress cover.
 Undo corner toggles holding comforter cover and remove
comforter cover. Inspect comforter cover and clean if
necessary.
 Undo toggles holding top deck to foam base.
 Undo plastic clip at foot end of foam base holding the foam base to the cover.
 Remove bottom part of mattress cover.
After cleaning the mattress cover:
 Reinstall mattress cover by reversing the process described above.
 Make sure all toggles are put back in their respective holes.

LINET Multicare LE Specifications

General

Brand	LINET
Model	Multicare LE
Category	Medical Equipment
Language	English