48
12
Using Symbioso
12.1 Preparing the Bed for the Patient
12.1.1 Preparation
Inflate mattress (see Setup).
Put a sheet loosely on the mattress if not prescribed otherwise by qualified personnel.
12.1.2 Putting the Patient into the Bed
Lay patient on mattress.
For an ideal lying position:
If additional blankets or sheets are used, make sure that ease of movement is sufficient.
Ensure that blankets, sheets, clothing etc. do not cause pressure sores (e.g. due to creases, seams etc.).
Do not place any additional sheets, blankets etc. between mattress and patient.
Risk of suffocation due to air-impermeable mattress cover!
Use mattress cover correctly.
The nursing staff are responsible for the safety of the patient on the mattress
cover.
Risk of injury when putting patient into bed!
Before putting the patient into bed:
Ensure that mattress is completely and correctly inflated.
Ensure that mattress is correctly secured with safety straps.
Material damage due to dampness or contamination!
Make sure mattress cover has been cleaned and is completely dry (see
Cleaning/ Disinfection).
To Next Page
Loading...
Need help?
General
