Logicube ZClone Xi User Manual

QUICK START
Logicube ZClone™Xi User’s Manual 24
The System Settings screen allows users to configure different settings for the unit:
Details on the different System
Settings screens can be found in
Section 5.9: System Settings.
 Profiles
 Passwords
 Language/Time Zone
 Bay Roles
3.10 Network Settings
There following tabs are seen in the Network settings:
Details on the different Network
Settings screens can be found in
Section 5.10: Network Settings.
 Services – The network settings screen allows certain network services to be enabled or disabled.
 Interfaces – Allows the configuration of the network interface which include setting a static IP
address and allows certain network services to be enabled or disabled.
 HTTP Proxy – For the unit to be able to update software from a network (over the internet),
proxy settings may need to be set. Networks that have a proxy server for internet access will
require proxy settings for devices like this to connect to the Internet. This typically includes a
server (or IP address), a host port, a username and password.
3.11 Software Updates
New and improved software will be released from time to time. There are two ways to
update the software on the unit: From the web using a network connection or from a
USB drive.
Details on how to perform a software update, software
re-load, or firmware update can be found in Chapter
8: Updating/Loading/Re-loading Software.

Logicube ZClone Xi Specifications

General

Brand	Logicube
Model	ZClone Xi
Category	Disc Duplicator
Language	English