Logicube ZClone Xi User Manual

TYPES OF OPERATIONS
Logicube ZClone™Xi User’s Manual 47
 RANDOM BUFFER – The unit will create an 8MB
block filled with random values (each byte in the
8MB block will contain a random value). The
8MB block will be written repeatedly to fill the
entire drive.
 VALUE – Instructs the unit to use the specified
hexadecimal value to be written for the pass. The
values can range anywhere from 00 to FF.
5.4.2.3 Format
Formats the Target using the EXT4 or NTFS file system.
These settings are available:
 Format – When set to ON, the Target drive will be formatted.
The drive will be formatted with the user’s choice of file system
(EXT4 or NTFS). When set to OFF, the Target drive will not be
formatted.
 File System – Select the file system to be used to format the
Target drive. Users can select EXT4 or NTFS.
5.4.3 Job Info
The Job Info setting allows users to enter some information about the job. Job Info is not
required to start a Clone, Hash, or Wipe/Format operation.
Information entered here will appear in the logs. More information on the Job Info screen
can be found in Section 4.3.1.
5.5 Task Macro

Logicube ZClone Xi Specifications

General

Brand	Logicube
Model	ZClone Xi
Category	Disc Duplicator
Language	English